Learning methods in training of welders
04:51, 2009-Mar-17
.. 0 comments
.. Link
The welder training is supported by the DVS, the T?V or welding, authorized educational institutions offered. Depending on the institution of training, the full-time and part time is offered, does the training courses into modular or constructed in successive courses. Modular means that the trainee a specific welding procedures in order to learn techniques or materials and successfully completed training is entitled to the welding process also professionally applied. Successive constructed courses have the aim of the trainee fully certified Welders to qualify, with a further course always be visited only if the previous course was passed. With regard to the established methods and their objectives, there are three essential points: The placement of the theoretical content. These include, apart from their theoretical bases of each welding process, its application areas, or the necessary equipment to providing essential technical and Directives relating to safety, occupational safety and environmental protection. Practical applications. A very important part of training welders make practical application of learned content dar. Overall, however, for welding the old motto, practice makes perfect, that is, a safe handling of the welding quality and welding set and experience frequent practice outside and after the training. Optimization techniques. Welder training have not only the goal of basic knowledge, but also the already existing knowledge. The intention behind this is known and practiced techniques to optimize workflows for high-quality, in terms of time and money but most effective welding work to be carried out. Basically the difference between the applied teaching methods also afterwards, which brings knowledge of the trainee, what with the training he wants to achieve and what type of training is involved. In addition to general welding courses are also special training, for example for welding work in garages, in the steel building or bridge or in the apparatus and tanks.
Applying for an apprenticeship as a welder
04:50, 2009-Mar-17
.. 0 comments
.. Link
The main area of welders lies in the combination of metal parts, which depending on the requirements of different materials and welding procedures are used, and the subsequent re-work and control.
The welders are in metallverarbeiteten companies and thus for example in the body, pipes, appliances, bridges or heating.
Associations for welders
The training program for welders is regulated by two associations, one of the German association for welding and allied processes, just to the DVS, and the Technical Inspection Association, shortly Insp.
That means the training is not in operation, but in the course of an external site either of the associations themselves or by authorized organizations.
Mandatory schooling
Basically there is no prescribed by law schools, as a condition for welder training, should usually set the training facilities but at least one elementary school provided.
Welding Permissions
The training program for welders is available in two versions, either full time or part time job. The duration of training depends on what prior knowledge of the trainee brings the skills of aspiring and what course he attended.
Basically, it is possible to either weld only permissions in each welding process or a full qualification.
Training
For the education or training course will be no remuneration.
The courses and partly also the work materials are charged with the costs or subsidize the cost of teaching, such as a training program for the metal, or the Federal Labor Agency in principle not excluded.
Registration as a welder
To that extent, an application for a training program for welders ultimately no application, but rather an application for each course at a training center. In many cases, the course places an appropriate application form is available, otherwise mostly just an informal application letter.
The important thing is, name, address, training and course indicated, certain participation requirements to be fulfilled, for example, already completed courses in consecutive courses, should also be accompanied by appropriate evidence.
The 5 most important safety aspects of welding
04:49, 2009-Mar-17
.. 0 comments
.. Link
Even if not only in craft and industrial premises, but again and again in local garages and welding shops, there are some important safety aspects, the welding must be strictly respected, the protection of one's own person, to protect the environment and also to the material is not unnecessarily damage and wasting.
1. Protective clothing.
The most important thing of all is, and his body to protect, because the welding is associated with high temperatures that cause burns to skin and also to irreparable damage to the eyes can result. In this respect belong to an appropriate protective clothing, gloves and eye protection appropriate in the form of goggles or a protective shield.
2. No flammable objects in the vicinity of the weld site.
The Work for the welding must be chosen so that the sparks, which arise during welding, can not lead that neighboring objects catch fire.
3. Ventilation.
In particular, when welding with gases need for good ventilation should be ensured, because gases escape to the ambient air needed for breathing oxygen.
4. Extinguisher handy and no questionable or unsecured accessories.
Not only in terms of their own security, but also because of existing legislation must be in welding, a fire extinguisher is within reach. In addition, only certified equipment may be used and no case of, for example, cost reasons or because nothing tangible is to fall back on unexamined accessory or accessories, for reasons of time used to be unsecured.
5. Audience.
It is important that the welder is actually welding work on his focus and not take care needs, where visitors and spectators are located.
This is true both in terms of the risk of injury for spectators, for example, by flying sparks that could be burned, both in terms of safety for the welder, such as when a guest on a hose enters into or tripping, and falls to the welder.
About Me
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
Links
Categories
Recent Entries
- Learning methods in training of welders
- Applying for an apprenticeship as a welder
- The 5 most important safety aspects of welding